If you need further assistance, please contact Brother customer service: Find out more Accept. SSID, Network key etc. Related FAQs What is the recommended paper? Remove each sheet of labels or envelope as soon as it has been printed.
How can I reduce the time it brothet to start feeding paper? If it is not, it may not be fed properly, resulting in a skewed printout or a paper jam.
Very helpful Helpful Not helpful.
FAQs & Troubleshooting
If you need further assistance, please contact Brother customer service: To help us improve our support, please provide your feedback below. How bfother the information on this page help h-l2170w Put one full sheet of labels or one envelope into the manual feed slot with the side to be printed face up. If you put any Media paper, envelope and so on in the manual feed slot before the machine is in the Ready mode, the media may be ejected without being printed on.
When the face-up output tray is pulled down, brothr machine has a straight paper path from the manual feed slot through to the back of the machine. The installation states a file is missing.
Have you checked the manuals? When you use Envelope 10, choose ” Com ” in Paper Size. SSID, Network key etc.
If your question was not answered, have you checked other FAQs? How does the information on this page help you? Stacking them may cause the paper to jam or curl. Make sure that the full sheet of labels or the envelope is hl–2170w and in the proper position on the manual feed slot.
Please locate the file, occurs during installation. Install your Brother machine’s software from the supplied installation disc.
How do I print a Test page? | Brother
Related FAQs What is the recommended paper? If envelopes bother smudged during printing set the Media Type to ” Thick Paper ” or ” Thicker Paper ” to increase the fixing temperature. Recently, when I print a document from the manual feed slot, my Brother machine is taking more time than usual to start feeding paper.
Please note this form is used for feedback only. Go to the Contact Us section. Please note this form is used for feedback only.
Contact Us Product Registration. If your question was not answered, have you checked other FAQs?
FAQs & Troubleshooting | HLW | Others | Brother
Do not use the paper tray. For the recommended paper to use, please refer to the FAQ, “What is the recommended paper?
The side to be printed should be faced up. What is the password for the print server when connected to a network? Put a new DL size double-flap envelope in the manual feed slot with the longest edge of the envelope in first, then print again.
All sides of the envelope should be properly folded without wrinkles or creases. Print on labels and envelopes from the manual feed slot. Find the Wireless Security Information e.